The zipper machine is mainly composed of various hydraulic components and hydraulic auxiliary components. Among them, the oil pump and the motor are the power source of the injection molding machine. Time) and various program actions. It is mainly composed of electrical appliances, electronic components, meters, heaters, sensors, etc. There are generally four control modes, manual, semi-automatic, fully automatic, and adjustment.
The heating system of the zipper machine is used to heat the barrel and the injection nozzle. The barrel of the injection molding machine generally uses an electric heating ring as a heating device, which is installed on the outside of the barrel and is detected in sections by a thermocouple. The heat conducts heat conduction through the wall of the cylinder to provide a heat source for the plasticization of the material; the cooling system is mainly used to cool the oil temperature, too high oil temperature will cause a variety of faults, so the oil temperature must be controlled. The other location that needs to be cooled is near the feeding port of the feed pipe to prevent the raw material from melting at the feeding port, causing the raw material to fail to be fed normally.
The zipper machine has reasonable design, novel structure and long service life. It is a new product used for horizontal (or inclined ≤15°) conveying powder, granular, and small block materials. The zipper machine is at the domestic advanced level in technology. The performance is significantly better than screw conveyors, buried scraper conveyors and other conveying equipment. It is an ideal new type of conveying equipment.
Zipper machines are widely used in building materials, chemicals, mining, metallurgy, electric power, grain and oil processing, machinery, transportation, ports and transportation industries. The Fu type chain conveyor uses the characteristics of internal friction and side pressure of the bulk material to ensure the stable state between the material layers and form a continuous overall flow under the action of the conveyor chain. The chain conveyor is mainly composed of the head section, the middle section, the optional section, the tail section, and the conveyor chain, the feed inlet, and the driving installation. The driving installation is divided into left and right installations. The driving installation model is based on the transportation volume and The conveying length is optional, and there are three types of inlets: upper inlet, side inlet, and both sides inlet. The outlet is the head outlet, and it can also be the middle bottom outlet and the middle side outlet. , For users to choose.